defaultalt Technical University of Denmark
CT image of lungs and heart 31655 Medical Imaging Systems
    Main page
DTU Teaching Center for Fast
Ultrasound Imaging
Field II JAJ

Plan

Menu Line

Teams 2023

Menu Line

Course material

Menu Line
Programs
Menu Line

Exercises

Menu Line

Ultrasound Data

Menu Line
   Simulated data
   Phantom data
Menu Line
      Audio data
      RF data
      Matrix phantom
Menu Line
   In-vivo data
   In-vivo CFM
   VFI data
Menu Line
CT Data
Menu Line

Papers

Menu Line

Teachers

Menu Line

Description

Menu Line
Learning objectives
Menu Line
News
Menu Line

About this site

Menu Line


Ultrasound RF phantom data


The data was obtained from the phantom type DFS 384 shown below. It was made by Danish Phantom Design.

Flow phantom

The phantom generates a constant flow in a 13.6 mm diameter tube. The tube has a wall thickness of 0.2 mm, and the attenuation of the surrounding medium is 0.5 dB/[MHz cm]. The RF signal from the transducer was sampled for a number of pulse-echo lines. You can find more information about the laboratory at the CFU home page.

The data for the measurements are given below:

Ultrasound scanner: B-K Medical A/S type 3535
Scan mode:Duplex
Transducer: B-K 8556, 3.2 MHz linear array probe
B-mode frame rate: 27 f/s
B-mode gain: 30%
Doppler gain: 100%
Pulse repetition frequency: 3.5 kHz
Wall filter: cut-off at 5.8 cm/s
Angle between flow and beam: 63°
Sampling frequency: 15 MHz
Resolution: 12 bits samples

The data can be obtained from the ftp-server from the directory:

https://courses.healthtech.dtu.dk/22485/files/ult_data/phantom/rf_data/

Several files are found. The properties are listed in the following table:

File name Samples per line RF lines Place of sampling Depth Range gate
phtst5.mat 128 8000 Center of vessel 44 mm 2 mm
phtst52.mat 256 4000 Center of vessel 44 mm 2 mm
phtst6.mat 128 8000 Center of vessel 44 mm 4 mm
phtst62.mat 256 4000 Center of vessel 44 mm 4 mm
phtst7.mat 128 8000 Edge of vessel 32 mm 2 mm
phtst72.mat 256 4000 Edge of vessel 32 mm 2 mm
phtst8.mat 128 8000 Edge of vessel 32 mm 4 mm
phtst82.mat 256 4000 Edge of vessel 32 mm 4 mm

Depth is the distance from the transducer surface to the center of the range gate used during the measurement.

The files should be downloaded in binary format. The files can be directly read and manipulate with Matlab. The variable phtstXX contains the RF data.

Note:

The RF data was not sampled simultaneously with the audio data given on the other web-page, and the velocities, angles, and depths are different as well.


/22485/ultrasound_data/pht_rf.html
Last updated: 11:55 on Thu, 24-Sep-2020